Bytecc PCIe SATA II 300 Manual do Utilizador

PCIe SATA II 300 + PATA Raid Card User Manual Ver. 3.00 All brand names and trademarks are properties of th

MN2000000143 Page10 Solve Mirror Conflict When a RAID set is created, then metadata written to the disk includes drive connection information. If,

MN2000000143 Page11 4. Please use arrow keys ↑ and ↓to select the array you want to rebuild, press Enter. 5. Please use arrow keys ↑ and ↓to se

MN2000000143 Page12 1. Setup the RAID Array prior to Windows installation. 2. Follow Microsoft’s Windows installation procedure. 3. At the Windo

MN2000000143 Page13 4. At the Windows desktop, click Start, then Run. 5. Type D:\PCIe\JMB36X\Setup.exe, click OK. (Change D:\ to match your CD-

MN2000000143 Page14 instructions to complete the Windows installation. For An Existing Installation 1. Setup the RAID Array prior to driver insta

MN2000000143 Page15 installation. To make this floppy disk, copy the contents of the “PCIe\JMB36X\Floppy32” folder, found on the driver CD, onto a

MN2000000143 Page16 3. Please insert the CD driver bound with PCIe SATA II 300 + PATA Raid Card into your CD-ROM Drive. 4. At the Windows desktop

MN2000000143 Page17 match your floppy drive letter) 5. Follow the on-screen instructions to complete the Windows installation. For An Existing In

MN2000000143 Page18 To Verify Driver Installation 1. Right click My Computer and click Manage. 2. Select Device Manager. 3. Look for the followi

MN2000000143 Page2 Features and Benefits z Compliant with one-lane 2.5Gb/s PCI Express specification z Compliant with Serial ATA 1.0 specificatio

MN2000000143 Page3 System Requirements z PCI Express-enabled system with one available PCI Express slot z Windows® 2000, XP/2003 32/64 bit, Vista

MN2000000143 Page4 Jumper Settings JP Description Active Port J1-J4 1-2 close Enable SATA Port CON1 2-3 close Enable SATA Port CON3 J5-J8 1

MN2000000143 Page5 Hardware Installation 1. Turn Off the power to your computer. 2. Unplug the power cord and remove your computer’s cover. 3. R

MN2000000143 Page6 RAID 0+1 Disk Striping + Mirroring 4 JBOD Disk Concatenation 2 or 3 or 4 RAID 0 (Striping) 1. As the BIOS boots press Ctrl

MN2000000143 Page7 BIOS. RAID 1 (Mirroring) 1. As the BIOS boots press Ctrl+J when prompted to enter the RAID BIOS. 2. At the next screen selec

MN2000000143 Page8 RAID BIOS. 2. At the next screen select Create RAID Disk Drive, press Enter. 3. Enter RAID name, press Enter. 4. Please use a

MN2000000143 Page9 01-Stripe+Mirror, then press Enter. 5. Please use arrow keys ↑ and ↓ to select chunk size from 4K, 8K, 16K, 32K, 64K or 128K,